A sound system for one room. Yours.

A service, not a catalogue product

A bitwerk custom system is built for one venue at a time, on request. The drawings show an example of the design, not a product to order; every system is planned, quoted and built for its room.

How a project runs

1. 01 Survey: we look at the room, how it is used and what plays there, on site or from plans.
2. 02 Simulation: the system is planned and simulated for the room before anything is built.
3. 03 Build: the speakers are made for the project, in the design of the bitwerk speakers.
4. 04 Tuning on site: we set up, measure and tune the system in the room, with the room correction in bitwerk.

An example: a bar of 15 × 9 m

You get one quote per project, for the system, the work and the travel.

An example: three parts per side

• Highs: the triangular pyramid on two rods on top, larger than at home.
• Mids: a multicell horn, a grid of small horns, lying directly on the bass horn, flush at the front.
• Bass: a bass horn lying on its side at the bottom. For more level, two upright bass horns stand side by side under the same mid horn.

Bass horns

The bass comes from bass horns: a narrow, deep, closed block with a grid on top. Standing upright, the lower part of its front is open across the whole width, where the horn’s mouth comes out. Laid on its side under the tower, the mouth runs up the outer side of the front.

Built for the venue

• Same design as at home: the same pyramid on two rods, plain blocks.
• Fixed installation: stacked on the bass horn, built for the room.
• Actively crossed with DSP: one amplifier channel per band; the box presets come from measurements.
• With bitwerk: played from a bitwerk b1 and s1, with the room correction in bitwerk.

Two set-ups

Fig. 02, the tower: bass horn on its side, mid horn, tweeter on two rods

Fig. 03, larger: two upright bass horns side by side under the same mid horn and tweeter

What you get

What you get

System	planned for your room, per side a pyramid, a multicell mid horn and a bass horn as in the example
Installation	fixed
Work	survey, simulation, build, tuning on site
Quote	per project

The range

1. s1 Streamer: One block. One knob. Nothing left out. · Built to order
2. h1 Speakers: Made to be seen. Built like a studio monitor. · Built to order
3. m1 Mini: One room. One box. No screen. No dust. · In design
4. c1 Desk controller: Control over your music and your system. · In design
5. b1 Base: Every album you own. Out of sight. · In design

Built to order

• Custom systems: A horn system for one bar, restaurant or venue, planned, built and tuned on site.

Plan a custom system

Tell us about the venue: its size, how it is used and what plays there. We answer in person with the next steps for a survey and a quote.

Describe your project

or write to [email protected]